Your Gutter Guard Guide

Gutters are an essential part of your roofing system. They carry water far away from your home, so it doesn't cause any water damage to the roof or home. Gutter guards help prevent debris from building in the gutters. If you would like to know more, keep reading.

Types of Gutter Guards          

There are many types of gutter guards, including:

• Screen
• Micro mesh
• Reverse curve
• Brush
• Foam

Different gutter guards work differently. Screen and micro mesh gutter guards sit over the top of the gutters to prevent debris from getting through. Micro mesh guards have smaller holes than screens, so they block more debris. These are incredibly effective, but the holes can get clogged.

A reverse curve gutter guard is one of the best-known because they are incredibly effective. They are made from metal or plastic. Like screens, they sit on the top of the gutters, but they curve at the edge. This curve allows water to slide into the gutters while causing debris to fall to the ground.

Finally, brush and foam gutter guards are incredibly affordable and easy to install yourself. They sit in the gutters and hinder the flow of debris without hindering the flow of water. The downside: you may have to clean them if they get clogged with debris.

Benefits of Gutter Guards 

The leading benefit of gutter guards is that they prevent debris from building up in the gutters. When the gutters get clogged with debris, they can't work. Water no longer flows to the downspouts. Instead, the gutters fill and then spill the water.

Not only can this impact your landscaping by causing erosion, but it also increases the risk of standing water around the foundation. In addition, as the water spills, it increases the risk of decay, mold, and other problems to the roof and siding. Gutter guards reduce the need to clean the gutters because little to no debris builds.

Cost and Installation of Gutter Guards

The cost largely depends on the type of gutter guards. Screens are usually some of the cheapest, with a plastic PVC screen costing about $0.35 to $1.13 per linear foot. Surface tension gutter guards are usually more expensive, costing about $3.58 to $6.69. Brushes and foam guards are a little less expensive, but you may be able to save money on installation.

Gutter guards are a great way to prevent debris from getting into the gutters. This saves you the trouble of removing leaves and twigs from the gutters. If you want to know more about gutter guards, contact a technician today.

For more information, contact a company like Tri Cities Gutter Solutions.

Share